Call For Admission - 9644139972

Advance Mobile Repairing Free guide Solution & Software

Saturday, 15 July 2017

Mobile Phone Repairing Tools & Equipment -मोबाइल टूल और उनका काम | Mobile All Tools |

Mobile Phone Repairing Tools & Equipment -मोबाइल टूल और उनका काम | Mobile All Tools |

When selecting tools and equipment for repairing mobile cell phones, it is important to select the best tools. Cheap or inexpensive tools and equipment may not be handy when repairing a mobile phone. On the other hand, best quality little expensive tools and equipment will help you to repair a mobile phone easily and comfortable. I am personally trained in mobile cell phone repairing and my personal experience says that we must always select and buy the best tools available in the market or online. These good quality tools may cost a little more but in the long term you will be happy that you bought the best tools.

1. Soldering Iron:

Used to solder small Component  A  50 watt soldering iron is good enough for most mobile phone repairing job. When buying a soldering iron, select the one that is easy to hold and does not burn you hand.

Price - Start From 50 Rs 
Buy Link –  Online buy Link.

2. Soldering Station  -

A soldering station has 2 units – a station and an iron. It has option to control temperature depending on the heat requirement of the soldering job being done. The soldering iron is attached with the soldering station. It is better and more convenient than traditional soldering iron. It makes soldering work much easier and faster. When buying a soldering station for mobile phone repairing one must always select an ESD-Safe (Anti-static) model. Hakko and Weller are two world renowned brands who manufacture, sell and export world class soldering irons and other soldering tools and equipment.
Market Price – Start From 250 Rs 
Ebay Link – Soldering Station Amazon Link  

3 .Digital Multimeter -  

Used to find faults, check track and components. Always buy a good quality reliable ESD-Safe digital Multimeter for mobile repairing works
Cost – Start From 120 Rs 

4. PCB Holder / PCB Stand

A PCB (Printed Circuit Board) holder or PCB stand is used to old the PCB of a mobile phone while soldering or repairing. It holds the PCB very strongly and doesn’t allows it to move thus helping in repairing. Again, it is important and wise to select a good quality PCB holder rather than a cheaper and inexpensive one.

Cost – Start From 80 Rs 

5. Solder Wire 

Solder wire is used to solder electronic components, ICsor jumper. Composition of most solder wire is Tin / Lead in the ratio 60:40 or 63:37. Since the introduction of RoHS (Restriction of Hazardous Substances) from electronics, more and more companies are using lead-free solder. Lead-free solder wire is available in many compositions but the most common composition is Tin / Silver / Copper in the Ratio 96.5:3.0:0.5. Solder wire is available in different diameters such 2.0mm, 1.5mm, 1.0mm, 0.5mm, 0.2mm etc. For mobile phone repairing 0.5mm solder wire is best suitable. Kester is a world renowned manufacturer and supplier of solder wire and other soldering material. 

Cost – Start From 50 Rs 

6. Thinner or PCB Cleaner 

Thinner or PCB cleaner is used to clean the PCB of a mobile phone. The most common PCB cleaner used in mobile phone repairing is IPA or Isopropyl Alcohol. It is important to buy only good quality PCB cleaner as poor quality PCB cleaners can damage the board.

Cost – Start From 50 Rs 

7. Jumper Wire

 This is a thin laminated or coated copper wire used to jumper from one point to another on the track of a mobile phone while repairing. Most people doing the work of mobile repairing do jumper to solve many problems.

Cost – Start From 8 Rs 

8. Blade Cutter 

This is used to remove lamination from jumper wire. It can also be used for several other purposes.

Cost – Start From 10 Rs 

9. Screwdriver 

It is used to remove and tighten screws while assembling and dissembling a mobile phone. Precision screwdrivers of sizes T4, T5, T6 and forehead are good for most mobile repairing job.

Cost – Start From 80 Rs 

10. Tweezer 

These are needed to hold electronic components, ICs, jumper wire etc while soldering and Desoldering.

Cost – Start From 50 Rs 

11. Brush 

These are used for cleaning the PCB of a mobile phone while repairing. It is important to buy only ESD-Safe cleaning brushes. 

Cost – Start From 50 Rs 

12. Multimeter 

Used to find faults, check track and components. Always buy a good quality reliable ESD-Safe digital Multimeter for mobile repairing works.

Cost – Start From 120 Rs 

13. Hot Air Blower - SMD Rework Station Hot Air 

It is also called SMD (Surface Mount Device) rework system and SMD repair system. It has control to regulate or manage temperature and flow or hot air. Always buy a good quality ESD-Safe hot air blower.

SMD Rework Station (हॉट गनक्या है 
मोबाइल रिपेयरिंग के सभी जरुरी Tools में Hot Gun ही सबसे बड़ा व मंहगा Tool है,SMD Rework Station और हॉट एयर ब्लॉवर से मोबाइल के Card Level Parts जैसे – सिम व मैमोरी कनेक्टर आदि व चीप लेवल पार्टस जैसे – PCB पर सभी IC, BGA आदि को लगाया (Soldering) व हटाया (Desoldering) जाता है और छोटे पार्टस जैसे –transistor, capacitor, coil, pf, boost coil, resistance, fuse, led, diodes आदि को भी SMD Rework Station से Heat करके हटाया व लगाया जाता है
किसी भी SMD Rework Station के दो Knobs होती है एक Knob गर्म हवा के प्रवाह को Control करती है और दुसरी Knob तापमान को Control करती है SMD Rework Station के हैण्डल में टोंटी लगी हुई होती है जिसमें से गर्म हवा प्रवाह करती है । इस गर्म हवा से IC के नीचे लगा Soldering Paste पिघलने लगता है , BGA Kit से बॉल IC को बनाने व रिपेयर करने में भी इसका उपयोग किया जाता है ।

Market Starting Price –  1999/-

14.Battery Booster

It is used to boost the power of battery of a mobile phone.

Market Starting Price –  1999/-

14  Ultrasonic Cleaner 

Used to clean PCB of a mobile phone and electronic components.

Market Starting Price –  1999/-

15 BGA Kit 

 Used to Reball and repair ball-type ICs. BGA stands for Ball Grid Array.

BGA Kit और BGA Reballing Kit का उपयोग BGA IC की Balls को Solder व Reballing के लिये किया जाता है जो कि आपको बताया जा चुका है BGA IC के Reballing Kit मार्केट में रोज नये आते रहते है इसलिये किसी अच्छे Latest BGA Reball Kit को Buyकरे ।
एक Complete Reballing Kit में वो सभी आवश्यक Tools होने चाहिये जो BGA IC को Reball करनें में काम आते है लेकिन सामान्यता: Soldering Iron और SMD Rework Station BGA Raballing Kit के Part नही होते है ।

BGA RABALLING KIT में आवश्यक Tools –

  • Solder Paste
  • Soldering Flux
  • PCB Stand Holder
  • Tweezers
  • BGA Desoldering Wire
  • BGA Desoldering Wick/Braid
  • BGA Reballing Stencil
  • IPA Isopropyl Alcohol Solution
  • ESD Safe Brush
  • Heat Resistance Kapton Tape
  • Stencil परPCB को Hold करने के लिये Clips

Market Price – 1499/-

16. Magnifying Lamp 

It is used to see the magnified view of the PCB of a mobile phone. Most magnifying lamps also have light. Magnifying lamps are available in different magnification such as 3x, 4x, 5x, 10x, 50x etc.

Market Price – 1499/-

17 . Anti static wrist strap

It is work in the wrist of the person who is repairing a mobile phone. It helps to discharge or ground static charge thus preventing the PCB or electronic components from any damage.

Market Price – 130/-

18. Manual LCD Touch Screen Separating Machine

यह मशीन मोबाइल फ़ोन में डिस्प्ले और टच निकलने के काम में आती है

19 .SMD Multimeter Test Tweezers

Siborg has begin offering a new device for use with multimeters: the SMD Multimeter Test Tweezers. This new device attaches to most multimeters and allows users to test and troubleshoot Surface Mount Technology using tweezers instead of long wire probes.

Efficient and Time-Saving Testing

To provide high accuracy, Smart Tweezers has a 4 wire Kelvin Probe running from the tips of the tweezer to the PCB insulated by handles, this means significantly less noise and better measurment precision. Features on Smart Tweezers include: semi-automatic offset subtraction feature which removes parasitics automatically after being set. The component sorting feature allows the user to test and identify components by just grasping them, this saves significant amount of time without needing to set-up the evaluation. Smart Tweezers are also exceptional for testing and debugging circuits, using a diode and continuity test feature. This feature utilizes an internal beeper that will sound when a reading is below threshold or an open circuit has been detected. Manual modes are available when a task needs specific parameters, users can select the test range or signal frequency that they need by just pushing the joystic-like-navigation up, down, left or right, there is no need to enter the menus.
Price – 2200 /-

20. Adhesive glue for Mobile phone lcd/ touch

B7000 Adhesive glue for Mobile phone lcd/ touch

Product description 
  • High elastic rubber film, soft vibration proof and waterproof glue
  • It also works on metal, ceramic, stone , bamboo, wood, leather, pvc, nylon, fabric, electronic components, plastics, rubber, paper and other materials have go on adhesion performance.
  • Multi functional adhesive, extraordinary strength and amazing design 
Technical specification 
  • Appearance – transparent semi floating body
  • solid content – 30% – 35%
  • After curing hardness – 65- 80A
  • Surface drying time – 3 minutes
  • Completely cure time- 24 to 48 hrs
  • save at degrees to 28 degrees of preservation 
Method of use 

  • Please make sure that the sticking surface is clean and dry before using this product
  • The best use of temperature should between 18-32 degrees
  • After opening the product cover, please timely cover it stitch removal of the adhesive residue on the cover
  • Wait for 2 – 3 minutes , two adherence alignment bonding with a little pressure
  • It is straight hour scan. after 48 hours to adhesive the best bonding strength 
Market Price – 249/-

Copyright by Asia Telecom ,Created By Asia Telecom. Powered by Blogger.