Call For Admission - 9644139972

Advance Mobile Repairing Free guide Solution & Software

Thursday, 24 August 2017

IPhone 6 Plus Backlight Ways Display Light Jumpers Solution - Iphone 6 प्लस मोबाइल डिस्प्ले White और Blank प्सलूशन जम्पर पिक्चर के साथ




IPhone 6 Plus Backlight Ways Display Light Jumpers Solution - iphone 6 प्लस  मोबाइल डिस्प्ले White और Blank प्सलूशन जम्पर पिक्चर के साथ 



Apple iPhone 6 Plus Display Light Ways Jumper Lcd Light Not Working Problem Dim Low Light Repair Solution
iPhone 6 Plus Light Problem Repairing Solutions are available in the following article. Also, you will find Apple iPhone 6 Plus Led Not Working Ways and Jumpers information in the diagrams further in this post. If your cell phone is having one of these faults check these diagrams out and do the solutions step by step


Problems
  • Blank display on Samsung S5360
  • Lines on Display screen.
  • Abnormal Colors on Samsung Galaxy Y S5360 display screen.
  • डिस्प्ले स्क्रीन blank हो जाना | 

Reasons of Problems
  • LCD screen has gone through some sort of physical damage (most of the time this is the case of Display problems in Samsung S5360).
  • LCD screen of phone or the phone itself might have encountered any kind of water damage.
  • Software is outdated.
  • Display connector might be loose, causing any of the above mentioned problems in your phone’s screens.
  • LCD might be faulty itself, and you need to change that in order to overcome this issue.
  • On-board connector might be water damaged or faulty.

In iPhone 6 PlusLight Problem can occur because of the faulty Lights IC or it’s bad connection to the Cell Phone’s PCBA Motherboard. So first you should clean iPhone 6 PlusLight IC Ways and Motherboard of the Mobile Phone. You Can Use any cleaning liquid for this purpose like CTC or any other you prefer. If you are certain that the bad connection is not the reason for your Mobile Phone’s fault, then you can replace the Lights IC with a new one.



Tools Required





  • Star screw driver.
  • Plastic separation tool for separating iPhone 6 Plus LCD screen from the body.
  • Heat gun.
  • Soldering gun.
  • Multi meter.

Hardware Solution




  • Now check the connection between the diode and the first pin of display connector (on – board), if there is no continuity between 1st pin of the display connector and diode then solder board pins and check.
  • If the above step fails then it means that diode might be faulty or is disconnected from the board. In order to resolve that gently heat diode and check, if it is still found to be faulty then replace diode.
  • If the above step fails in resolving this issue then it means your iPhone 6 Plus display screen is faulty and you need to change it.


If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Copyright by Asia Telecom ,Created By Asia Telecom. Powered by Blogger.