Call For Admission - 9644139972

Advance Mobile Repairing Free guide Solution & Software

Thursday, 31 August 2017

How To Flash Redmi 1S Mobile (Model Number -2013029)MIUI ( Red MI Xaomi Mobile Flashing 3 Method )




MIUI (   Red MI Xaomi Mobile Flashing 3 Method )

How To Flash Redmi 1S Mobile (Model Number -2013029)


For More Tutorial  - Redmi 2 (Model-HM 2LTE-IN) or 2014818 flash a dead phone



Method 1: System Update

Method 2: Recovery Update

Method 3: Fastboot Update




Method 3: Fastboot Update





What is Fastboot ROM:

Fastboot ROM is entirely different to that of Recovery ROM where you need to connect the device with PC and a Mi flashing tool is used. Here the user has the option to select whether to wipe data or not. The Fastboot ROM is mainly flashed whenever you facing any bugs/issues, bricked phones, etc.



If You want to Flash Any Redmi Mobile Phone in Fastboot mode, so You Require 



1.Computer

2.Original USB Cable

3.Mobile 



So we are here showing Flashing Redmi 1s  (Model Number -2013029) 


Step First - 

  • Download MI Rom - Download From Here 
Download Firmware - For Redmi 1s http://clkmein.com/q2PHC5




  • When Rom Download, it will showing like this 
  • File extension is (.tgz) 



  • Now Extract the Rom than Paste in C:Disk 



  • than Paste in C:Disk 



Step -2 

Download MI USB Driver - Download From Here Link- 2 



Step -3 

Download Mi-Flash Tool - download Here 

Step - 4

Open MI Flash Tool 

FLASH FASTBOOT ROM ON MI PHONES USING MI FLASH TOOL:

1. Download Fastboot ROM from the above link to your PC and extract it to desktop.
2. Now you need to download and install Mi Flash tool on your PC.
3. Next Run Mi Flash application and tap on ‘Browse’.





4. Next you need to select the ROM folder from desktop.


5. Turn off the device and enter into Fastboot mode. You need to press Volume Down + Powerbutton at the same time to boot your device into fastboot mode.



6. Connect your device with PC.
7. Next go to flashing tool and tap on ‘Refresh’ button to see the connected devices.



8. Once the device is detected, you have three options to choose as per your requirement as show in the above image.
  • Flash_all:- Clears all the data of the built-in storage, clear all user data, please be careful!(Clean Install)
  • Flash_all_except_storaget:- Will erase all user data does not clear the built-in storage data.
  • Flash_all_except_data_storage:- Does not clear the built-in storage data does not clear user data



10. Once done with the flashing process, the device will reboot automatically.

Note: As it is the first reboot after flashing ROM, it might take up to 5-10 minutes. So, hold your seats and wait.
So, it was the process to flash Fastboot ROM on any Mi Android Smartphone using Mi Flash Tool. 

If you face any problem while flashing Fastboot ROM, do leave a comment below as we are always there to help you out.
Copyright by Asia Telecom ,Created By Asia Telecom. Powered by Blogger.