HOW TO INSTALL TWRP RECOVERY ON SAMSUNG J2 MODEL J200G BY ODIN -Root Samsung Galaxy J2 SM-J200G 5.1.1 Lollipop

HOW TO INSTALL TWRP RECOVERY ON SAMSUNG j2 mODEL J200G BY ODIN 

Root Samsung Galaxy J2 SM-J200G 5.1.1 Lollipop

WHY IS TWRP FILE ? 

WHY TECHNICIAN REQUIRED TWRP FILE ? 

REQUIRE TOOL 

• COMPUTER 
• ORIGINAL USB DATA CABLE 
• MOBILE 
• TWRP FILE ( RECOVERY FILE ) 
• SAMSUNG USB DRIVER 
• SAMSUNG ODIN FLASH TOOL

STEP - 

• Firstly download the TWRP{Team Win Recovery Project} recovery image from  here (recovery.tar)  

Now download Odin program here (Odin)  and extract it to safe place. Now open the extracted folder then run it and move to next step.

               

• Turn off the phone and wait for 5-7 seconds.

• Now press and hold Volume Down + Home + Power buttons until Warning message appears on screen, then press Volume Up to proceed to download mode.

• Now connect your phone to PC using USB cable, and look on Odin program, ID:COM section will turn to green. If not then try disconnect and again connect your phone. If still Odin does not catch your phone then you should install USB drivers using Samsung Kies first then try again.

• Now on Odin program, select “PDA” button and then find and locate the downloaded “recovery.tar” file. 
• On Odin make sure that “Re-Partition” box is unchecked and don’t make any changes.

• Click on Start button and wait for the completion.

So till now you have successfully installed Twrp Recovery on your Samsung j200g

To test Recovery – Press Volume up + Home + Power Button

All Samsung Super User File Download - Link 

If Any Problem Occurs Write In Comment’s
Note: – If in any case, your phone gets damaged or bricked then we will be responsible for that. This guide in only meant for education purpose only.