How to Flash Stock Rom on Huawei
you can also Flash Stock Rom
using SP Flash tool. Sp flash tool is a Computer Software and it can Flash Stock
Firmwares on Only MTK Chip set android
Devices.. in this post we do this manually using Micro SD card
Before Flash Stock Rom
on Huawei Ascend G620s , you should know these things
♥ You can do this if you want Go back to Custom Rom to Official
Stock Rom or reinstall Stock Rom.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ If you want to upgrade your Rom then you have to find upgraded Rom – marshmallow, kitkat .we provide only Official Rom
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ If you want to upgrade your Rom then you have to find upgraded Rom – marshmallow, kitkat .we provide only Official Rom
Install
Stock Rom on Huawei Ascend G620s
Requirement for Flashing Official Firmware/ ROM
Step 1
Step 2,
Download Official Stock Rom For Huawei
Step 3,
Go to SD card and create New
Folder and rename it “Dload”
Step 4,
- Connect your phone to
Computer
- Now, Copy Downloaded Stock
Rom and paste it to “SD card/Dload” Folder.
Step 5,
after copy, turn off
your Huawei Ascend G620s h30 t10 by pressing power key
Now,
Press Volume Up + Volume Down + Power key together for 8 seconds until appear
update process. normally. update process take 5-10min to complete its job
Or
Step 7,
after completed Update process,
your Huawei will reboot automatically. after then you can use your
android phone
Congratulations, Now you
successfully installed Stock Rom
Another way of installing Stock
ROM on Huawei
Step 1,
Take your phone and Create a
new folder on your micro SD and rename it to “dload”
Step 2,
Now, Copy the Downloaded “UPDATE.APP” (Stock Rom) and past it to the dload folder on DS card,
Step 3,
Final step is, Go
to Settings –> About Phone/Updater –> press “Local Update” to start
the flash process.
Step 4,
Now Choose the download
file and device will be updated with stock ROM
Errors and Solutions
phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again.
Huawei stuck at Boot logo
or Bootloop
A: Git it to 5min because first
boot is Slow. Remove the battery
for 60 seconds then insert back. If
not works then boot into recovery mood and wipe the data. If not works then Try
again to
install Stock Rom.
Update failed’
Q : progress bar load to middle process but freez/stuck and
then show me a message ‘update failed’
A : Use correct Stock Rom.. Use SD card to create dload.. try
with SP Flash tool
automatically disconnecting during flashing Huawei
phone
Try another data cable.
Try to install Drivers again
Try above method (using SD card)
Try to install Drivers again
Try above method (using SD card)